Buffalo G108 Instruction Manual download pdf (Page 3)

Telephone Helpline: 13300225960 (Australia)

Operation

Location of Controls

Before Using for the First Time

BUFFALO recommend that the appliance is cleaned out before using for the first time, or if the appliance

has been sat unused for an extended period of time.

1. Fill the water reservoir with cold water.

2. Slide the empty filter basket into position between the two basket tabs.

3. Place the jug on the base hotplate beneath the basket.

4. Turn the Brewing power switch On . The Brewing Indicator lights up and hot water will begin to fill

the jug.

5. Once finished the Brewing Indicator light will switch off. Discard the hot water in the jug.

6. Repeat steps 1-5. The appliance is now clean.

Note: Use the Jar to fill the reservoir to ensure the maximum capacity of the jar is not

exceeded. The maximum amount of water the reservoir can contain is 2.2 litres.

Note: During operation, steam may rise from the appliance and loud bubbling noises

may be heard. This is perfectly normal.

WARNING: The glass jug becomes hot during operation. Always pick up the jug by the

handle to avoid injury.

Upper hotplate

Basket tabs

Brewing power

switch

Upper hotplate

power switch

Jug

Water reservoir

Brewing Indicator

light

Filter basket

Base hotplate

1 2 3 4 5 6 7 8

No comments

Buffalo G108 Instruction Manual Page 3