Buffalo TeraStation WSS 5000 User Manual download pdf (Page 7)

into a USB 3.0 port, move the boot switch to the USB position, and press the power button.

14 UPS Port

Connect to a UPS.

15 USB 3.0 Port

Compatible Buffalo USB 3.0 hard drives, USB flash drives, digital cameras, and USB UPSs can be connected. USB

hubs are not supported.

16 USB 2.0 Port

Compatible Buffalo USB hard drives, USB flash drives, digital cameras, and USB UPSs can be connected. USB hubs

are not supported.

17 LAN Port 1

Use an Ethernet cable to connect this port to your network.

18 LAN Port 2

This second Ethernet port may be used for network redundancy or backup. You may connect a second TeraStation

directly to this port for backup.

19 Power Connector

Use the included power cable to connect to an UPS, surge protector, or outlet.

20 Fan

Do not block the fan.

21 Anti-Theft Security Slot

Use this slot to secure your TeraStation with a cable lock (not included).

22 UID Button

Press the UID button on the front or the back of the unit to cycle the blue LED on and off.

23 Serial Number

This sticker shows the TeraStation’s serial number.

24 Link LED

Glows orange when the unit is connected to a network.

25 Act LED

This LED shows network activity. It blinks orange when the TeraStation is accessed over the network.

Installation

Note: If using OS X (10.4 or later), download and install “Remote Desktop Connection Client for Mac 2” from www.

microsoft.com.

1 Connect the TeraStation’s Ethernet and power cables and turn it on.

2 Connect the supplied USB device to your computer. Open the USB device and double-click TSNavi.exe in the

1 2 3 4 5 6 7 8 9 10 11 12 ... 76 77

No comments

Buffalo TeraStation WSS 5000 User Manual Page 7