Buffalo NFINITI WZR-HP-G300NH User Manual download pdf (Page 106)

Chapter 6 Trouble Shooting

WZR-HP-G300NH User Manual 105

Cannot connect to the network wirelessly.

• Congure your wireless client with the same SSID, encryption type, and encryption key as set

on the AirStation.

The factory defaults are:

SSID - The AirStation’s MAC address (printed on the label)

Encryption Type - WPA/WPA2 mixed mode - PSK (Connect with either WPA-PSK TKIP or

WPA2-PSK AES).

Encryption Key - Printed on the label of the AirStation (if not, the AirStation is not

encrypted in the default conguration.)

• Place your AirStation and wireless devices 2 - 10 feet apart.

• Restart your AirStation.

You forgot AirStation’s SSID, Encryption Key, or

Password.

Hold down the Reset button on the base of your AirStation for 3 seconds to initialize its settings. All

settings, including your password, SSID, and encryption key will be initialized to their defaults. The

factory defaults are:

SSID - The AirStation’s MAC address (printed on the label)

Encryption Type - WPA/WPA2 mixed mode - PSK (Connect with either WPA-PSK TKIP or

WPA2-PSK AES).

Encryption Key - Printed on the label of the AirStation (if not, the AirStation is not

encrypted in the default conguration.)

The link speed is slower than 300 Mbps (Maximum

link speed is only 150Mbps).

By default, the AirStation’s 300 Mbps mode is not enabled. You may enable it with the following

procedure:

1. Open the conguration utility (chapter 4).

2. Click [Wireless SSID & Channel (11n 300Mbps Mode)] in Easy Setup.

3. Change the value in [300Mbps Mode] - [Band Width] to 40 MHz and click [Apply].

If you still cannot connect at 300 Mbps, check the settings of your wireless client device.

1 2 ... 101 102 103 104 105 106 107 108 109 110 111 ... 132 133

No comments

Buffalo NFINITI WZR-HP-G300NH User Manual Page 106