Buffalo NFINITI WZR-HP-G300NH User Manual download pdf (Page 21)

WZR-HP-G300NH User Manual 20

Chapter 4 Conguration

The web-based conguration tool lets you change advanced settings for the AirStation. Don’t

change these settings unless you know what you’re doing.

How to Access the Web-Based Conguration Utility

To congure the AirStation’s advanced settings manually, log in to the web-based conguration

utility as shown below.

Launch a web browser.

Enter the AirStation’s LAN-side IP address in the

address eld, and press the [Enter] key.

Note: · The AirStation’s default LAN-side IP address depends on the position of the mode switch.

In router mode: 192.168.11.1

In bridge mode: 192.168.11.100

Note: If the router switch is set to [AUTO] and the unit is in bridge mode, then the AirStation’s IP

address was assigned by an external DHCP server.

· If you changed the IP address of the AirStation, then use the new IP address.

When this screen appears, enter [root]

(in lower case) for the user name and the

password that you set during initial setup.

Click [OK].

Note: · By default, the password is blank (not set).

· If you forget your password, hold down

the Reset button (page 12) to initialize all

settings. The password will then be blank.

Note that all other settings will also revert to

their default values.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 132 133

No comments

Buffalo NFINITI WZR-HP-G300NH User Manual Page 21