Buffalo LinkStation Mini User Manual download pdf (Page 77)

Using your LinkStation

LinkStation User Manual 76

UPS Settings

A UPS (uninterruptable power supply) can automatically shut down your LinkStation in case of a

power outage. To use the LinkStation with a UPS, congure the following settings:

Plug the Power cable of UPS to a wall socket.

Connect the AC adapter of the LinkStation to the UPS.

Connect the UPS and the LinkStation with a USB cable.

Turn on the UPS, then the LinkStation.

In the Web Admin interface, navigate to [System]

- [Power Management] - [UPS Settings] and click

[Modify Settings].

1 Check [Enable].

2 Congure settings.

Click [Save].

The LinkStation is now congured to work with the UPS.

Note: If the LinkStation shuts down automatically due to a power outage, make sure that the power

issue is resolved before turning it back on. If the LinkStation is turned back on while it’s still

running on the UPS battery, the UPS will not shut it down again, even if the battery runs low.

System Power Management

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 170 171

No comments

Buffalo LinkStation Mini User Manual Page 77